2.2.2 iDS-7700NXI-I4/(16P)/16S(B), iDS-7600NXI-I2/8F and
iDS-7600NXI-I2/P/8F Series
Purpose:
The following section introduces the HDD installation.
Before you start:
Ensure power is disconnected.
Prepare a factory recommended HDD, and cross screwdriver.
Step 1 Unfasten screws on each panel to remove the device cover.
Step 2 Connect the data cable and power cable.
Step 3 Match HDD screw threads with the reserved holes on the device bottom, and fix HDD with
screws.
Network Video Recorder Quick Start Guide
Figure 2-8 Remove Cover
Figure 2-9 Connect Cable
30