How To Remove Target Data; How To Display, Hide And Sort The Target List - Furuno FAR-1513-BB Operator's Manual

3.10.2

How to remove target data

Place the cursor on a desired tracked target and press the TGT CANCEL key. The
select target's data is removed from the data display area.
3.10.3

How to display, hide and sort the target list

The target list provides a comprehensive data display of all TT (and AIS) targets being
tracked.
How to display/hide the target list
1. Select the [Target List] menu item at the bottom-right of the screen, then press the
left button. The target list appears inside the information box.
2. Select the [Target List] menu item at the bottom-right of the screen, then press the
left button to hide the target list.
How to sort the target list
1. With the target list displayed, select [Sort by], then push the ADJUST knob.
2. Select the sort method, referring to the table below, then push the ADJUST knob.
Sort
method
[CPA]
[TCPA]
[BCR]
[BCT]
[RANGE]
[SPEED]
[NAME]
3. Select the appropriate filter option, if required, then push the ADJUST knob.
Note: Targets with no data are sorted to the back of the list, regardless of filter setting.
[TARGET LIST (1/2)]
SORT BY CPA
1 BACK(L=TOP)
2 AIS TARGET NAME
NAME FURUNOMARU
BRG 232.8°R RNG 2.19NM
CPA 0.13NM TCPA -05:34
3 TT TARGET
NO.4
BRG 049.6°R RNG 0.75NM
CPA 0.16NM TCPA> 99:59
9 REFRESH DATA
0 NEXT (L=LAST)
Targets are sorted in order from closest to farthest CPA.
Targets are sorted in order from shortest to longest TCPA.
Targets are sorted in order from closest to farthest BCR.
Targets are sorted in order from shortest to longest BCT.
Targets are sorted in order from closest to farthest range.
Targets are sorted in order from fastest to slowest.
Targets are sorted in Alphabetical order. Unknown names are displayed
last.
3. TARGET TRACKING (TT)
Sorting method
Target details
Description
3-9