Slow & Fast Motion Recording - Canon LEGRIA HF G60 Instruction Manual

Slow & Fast Motion Recording
You can record clips that have a slow motion or fast motion effect during playback, simply by selecting the
desired slow/fast motion rate. Available slow/fast motion rates will vary depending on the resolution and frame
rate currently selected. Sound is not recorded when slow & fast motion recording is activated.
Operating modes:
1 Select [Slow & Fast Motion].
> [3 ! Recording Setup] > [Slow & Fast Motion]
2 Select the desired slow & fast motion rate and then select [X].
• Select [j] to turn off slow & fast motion recording.
• or and the selected rate will appear on the right of the screen.
Available slow/fast motion rates
Resolution
3840x2160
1920x1080
NOTES NOTES
• Slow & fast motion recording cannot be used together with the following functions.
- Dual recording
- Relay recording
• While slow & fast motion recording is activated, the recording command signal will not be output from the
HDMI OUT terminal.
• About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [
- If the time code running mode was set to [
automatically to [
- When slow & fast motion recording is turned off, the time code running mode will return to its previous
setting.
- The time code signal cannot be output from the HDMI OUT terminal.
• The maximum continuous recording time of a single clip using slow motion recording is the equivalent of 6
hours of playback time. Recording will stop automatically after that. When the [x0.5] rate is selected, the
maximum continuous recording time will be 3 hours (which, played back at x0.5 slow motion, equal 6 hours of
playback time).
This restriction does not apply to fast motion recording, which will not stop automatically.
Frame rate
25.00P x2, x4, x10, x20, x60, x120, x600, x1200
50.00P x2, x4, x10, x20, x60, x120, x600, x1200
25.00P x0.5
- Pre-recording
- Color bars
Regen.], or to [
Rec Run] when slow & fast motion recording is activated.
Available slow/fast motion rates
Preset] with [
Free Run], the time code running mode will be changed
Slow & Fast Motion Recording
Rec Run] running mode.
41