Continuous Af; Changing The Af Frame Size - Canon LEGRIA HF G60 Instruction Manual

Adjusting the Focus
6 Turn the focus/zoom ring to adjust the focus.
• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment
range, the focus frame will turn white and the camcorder will then finish focusing automatically.
• While the focus stays within the automatic adjustment range, the camcorder will keep the subject in focus
46
automatically.

Continuous AF

By default, the camcorder will focus automatically on a subject at the center of the screen. If the AF frame size
has been changed to an option other than [k Automatic] (A 46), the camcorder will focus automatically on a
subject inside the AF frame that appears on the screen.
Operating modes:
* In mode, continuous AF is applied by default so this procedure is not necessary.
1 Press the AF/MF button to activate the autofocus.
• @ will appear on the left of the screen.
2 Set the AF frame size to [r Large] or [s Small] (A 46).
3 Select [AF Mode].
> [v " Camera Setup] > [AF Mode]
4 Select [ Continuous] and then select [X].
NOTES NOTES
• When [v Camera Setup] > [AF Frame Size] is set to [r Large] or
[s Small], a white AF frame will appear on the screen.

Changing the AF Frame Size

By default, when autofocus is used, the camcorder focuses on a subject at the center of the screen and no AF
frame is displayed. You can select to display an AF frame and change its size and position to focus on a specific
area or subject.
Operating modes:
1 Select [AF Frame Size].
> [v " Camera Setup] > [AF Frame Size]
2 Select the desired option and then select [X].
Options
[k Automatic]: No AF frame is displayed. The camcorder focuses automatically on a subject at the center of
the screen.
[r Large], [s Small]:
An AF frame is displayed. You can move the AF frame within 80% of the screen area and select
its size according to the subject you want to focus.
*