Canon LEGRIA HF G60 Instruction Manual page 73

3 Select [i On] and then select [X].
• å appears on the right of the screen.
Wind Screen (Built-in Microphone)
When no external microphone is connected to the MIC terminal, you can activate the built-in microphone's wind
screen to reduce the sound of blowing wind when recording outdoors. When recording in surroundings
unaffected by wind or if you want to record low-frequency sounds, we recommend turning off the wind screen.
Operating modes:
1 Select the [ Custom Setting] audio scene in advance (A 70).
2 Select [Built-in Mic Wind Screen].
>[C ! Audio Setup] > [Built-in Mic Wind Screen]
3 Select the desired option and then select [X].
• Depending on the selected setting, ë or à appears on the right of the screen.
Options
[H Auto (High)]: For a larger wind noise reduction effect. With this setting other low-frequency sounds will be
suppressed as well.
[L Auto (Low) ë]:
For a smaller wind noise reduction effect. Other low-frequency sounds are mostly unaffected.
[j Off]: The wind screen is turned off.
Audio Equalizer (Built-in Microphone)
When no external microphone is connected to the MIC terminal, you can apply frequency filters to change the
built-in microphone's characteristics.
Operating modes:
1 Select the [ Custom Setting] audio scene in advance (A 70).
2 Select [Built-in Mic Freq. Response].
> [C ! Audio Setup] > [Built-in Mic Freq. Response]
3 Select the desired option and then select [X].
Options
h
Appropriate for balanced sound under most normal recording conditions.
[ Normal]:
ç
[ Boost LF Range]:
Accentuates the low-frequency range for more powerful sound.
è
[ Low Cut Filter]:
Filters the low-frequency range to reduce the noise of blowing wind, a car's engine and similar
ambient sounds.
é
[ Boost MF Range]:
Best for recording human voices and dialog.
ê
[ Boost HF+LF Range]:
Best, for example, for recording live music and to clearly capture the special sound
characteristics of a variety of instruments.
Recording Audio
73