Canon LEGRIA HF G60 Instruction Manual page 107

Menu item
[Auto Power Off]
[REMOTE Terminal]
[Assignable Button 1] to
[Assignable Button 5]
[Onscreen Assignable Button]
[CUSTOM Dial & Button]
[Battery Info]
[Backup Menu Settings 7]
[GPS Auto Time Setting]*
[GPS Information Display]*
[Certification Information]
[Firmware]
[Reset All]
* Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
Setting options and additional information
[i On], [j Off]
In order to save power when the camcorder is powered by a battery pack, when this setting is set to
[i On], the camcorder will automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, the message [Auto Power Off] will
appear.
[ RC-V100 (REMOTE A)], [
Following are the default settings for each assignable button. For a complete list of the
functions that can be assigned, refer to the detailed table.
1: [B AF/MF], 2: [± Powered IS], 3: [z Pre REC], 4: [
5: [^ Magnification]
For a complete list of the functions that can be assigned, refer to the detailed table
(default: [ Photo]).
[ Tv / Av / M], [ AGC Limit], [y Exposure Comp.], [j Off]
—
Displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time ( mode) or playback time (
• If the battery pack is depleted, the battery information may not be displayed.
[Save], [Load]
[i Auto Update], [j Disable]
—
When the optional GP-E2 GPS Receiver is attached to the camcorder, the following settings become
available:
[GPS Auto Time Setting]: You can have the camcorder automatically set the time based on the
information acquired from GPS. For more details, refer to Setting Time from GPS on the Camera
in the receiver's instruction manual.
[GPS Information Display]: Displays the current GPS information. For more details, refer to Viewing
GPS Information in the receiver's instruction manual.
—
Displays certification logos that apply to this camcorder.
—
Displays the current firmware version of the camcorder.
• This option is usually unavailable.
[No], [Yes]
Resets all the camcorder's settings to default values/settings.
Standard]
mode).
Menu Options
(A 79)
(A 84)
Rec Review],
(A 84)
(A 83)
(A 86)
(A 80)
107