Table of Contents
Advertisement
Wireless Controller
First, insert the supplied CR2025 lithium button battery into the
wireless controller.
1 Press the tab in the direction of the arrow ( ) and pull out
the battery holder ( ).
2 Place the lithium button battery with the + side facing up
( ).
3 Insert the battery holder ( ).
To use the wireless controller
Point the wireless controller at the camcorder's remote sensor when
you press the buttons.
• You can rotate the LCD panel 180 degrees to use the wireless
controller from the front of the camcorder.
NOTES
• When the camcorder cannot be operated with the wireless controller,
or when it can only be operated at very close range, replace the battery.
• The wireless controller may not work properly when the remote sensor is situated under strong light sources or
direct sunlight.
Preparing the Camcorder
23
Advertisement
Table of Contents
