Slow & Fast Motion Recording - Canon XA40 Instruction Manual

Slow & Fast Motion Recording
Slow & Fast Motion Recording
You can record clips that have a slow motion or fast motion effect during playback, simply by selecting
the desired slow/fast motion rate. Available slow/fast motion rates will vary depending on the
resolution and frame rate currently selected. Sound is not recorded when slow & fast motion recording
is activated.
Operating modes:
38
1 Select [Slow & Fast Motion].
> [3 ! Recording Setup]
2 Select the desired slow & fast motion rate and then select [X].
• Select [j] to turn off slow & fast motion recording.
• or and the selected rate will appear on the right of the screen.
Available slow/fast motion rates
Resolution
3840x2160
1920x1080
1280x720
NOTES
• Slow & fast motion recording cannot be used together with the following functions.
- Dual recording
- Relay recording
• The maximum continuous recording time of a single clip using slow motion recording is the
equivalent of 6 hours of playback time, at which point, recording will stop. Consequently, it differs
depending on the slow motion rate used. For example, when the [x0.5] rate is selected, the
maximum continuous recording time will be 3 hours (which, played back at x0.5 slow motion, equal
6 hours of playback time). Conversely, fast motion recording will not stop in such a way.
• Changing the video configuration will deactivate slow & fast motion recording.
• While slow & fast motion recording is activated, the recording command signal will not be output
from the SDI OUT terminal (s only) or HDMI OUT terminal.
• About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [
running mode.
- If the time code running mode was set to [
changed automatically to [
- When slow & fast motion recording is turned off, the time code running mode will return to its
previous setting.
- The time code signal cannot be output from the SDI OUT terminal (s only) or HDMI OUT
terminal.
>
[Slow & Fast Motion]
Frame rate
29.97P x2, x4, x10, x20, x60, x120, x600, x1200
23.98P x0.8
59.94P x2, x4, x10, x20, x60, x120, x600, x1200
29.97P x0.5
23.98P x0.4, x0.8
59.94P x2, x4, x10, x20, x60, x120, x600, x1200
- Pre-recording
- Color bars
Regen.], or to [
Free Run], the time code running mode will be
Rec Run] when slow & fast motion recording is activated.
Available slow/fast motion rates
Preset] with [ Rec Run]