Canon LEGRIA HF G60 Instruction Manual page 67

3 After completing all the fields of the time code, select [OK].
• Select [Cancel] to close the screen without changing the time code.
• If the running mode is set to [
the moment you select [OK].
4 Select [X].
NOTES NOTES
• When slow & fast motion recording is activated, you cannot select the [
Conversely, when pre-recording is activated, [
• When slow & fast motion recording is activated, the time code signal cannot be output from the HDMI OUT
terminal.
• When you are using the [
built-in backup battery has some charge left, even if you disconnect all other power sources. However, this is
less accurate than when the camcorder is on.
Free Run], the time code will start running from the time code entered
Free Run] is set automatically and cannot be changed.
Free Run] running mode, the time code will continue running as long as the
Setting the Time Code
Free Run] running mode.
67