Ending Active Calls - Tait TM9355 User Manual

Ending active calls

78 Operating in conventional mode
Using a function key
1 Press the function key programmed for low-power
transmit to transmit at low power on your current
channel.
The message Low power tx activated appears
briefly, and the low-power transmit icon
on the display.
2 Press the low-power transmit function key again to
turn low-power transmit off, and the message Low
power tx deactivated appears on the display.
For analog channels, you may have a function key
programmed to either end the current call, or end the
current call and all other active calls in your group.
This can be done either by:
■
using the function key programmed for reset mon-
itor to end your current call,
■
using the function key programmed for call clear-
down to end your current call and all other calls in
your group, or
■
using the function key programmed for both reset
monitor and call cleardown.
Using a function key to end your current call
■
Press the function key programmed for reset mon-
itor. The radio's monitor is turned off, ending your
current call.
The green LED stops flashing, and the monitor
icon disappears from the display.
Using a function key to end all active calls
■
Press the function key programmed for call clear-
down and monitor is turned off for all radios in
your radio group.
appears