Tait TM9355 User Manual page 95

3 Press Select.
4 Check that orange LED is glowing and the network
icon
Making a call to a workgroup
Different types of calls may be associated with your
workgroups. These calls can be any types of calls.
To make a call to a workgroup:
1 Select the required zone. See
on page
2 Select the required workgroup. See
workgroup" on page
3 Press the PTT key, and a call to that workgroup is
made.
Dialing a workgroup call
It may be possible to dial workgroup calls, if you know
the number associated with the workgroup.
1 Dial w, where w is the number of the workgroup.
If your workgroup call number is the same as a call
to another radio, then you need to dial a leading 0.
For example, dial 23# to call radio 23 and dial 023#
for workgroup call number 23.
Clear
2 Press Send or the # or PTT key.
While the call is being setup, you can cancel the
call by pressing Cancel.
appears on the display.
94.
This feature is only available for radios with
alphanumeric keys.
23
Send
"Selecting a zone"
94.
Operating in trunked mode
"Selecting a
95