Ending Active Calls - Tait TM9300 User Manual

The message Low power tx activated appears
briefly, and the low-power transmit icon
in the display.
2 Press the low-power transmit function key again to
turn low-power transmit off, and the message Low
power tx deactivated appears in the display.

Ending active calls

You may have a function key programmed to either
end the current call, or end the current call and all
other active calls in your group. This can be done
either by:
using the function key programmed for reset mon-
■
itor to end your current call,
using the function key programmed for call clear-
■
down to end your current call and all other calls in
your group, or
using the function key programmed for both reset
■
monitor and call cleardown.
Using a function key to end your current call
Press the function key programmed for reset mon-
■
itor. The radio's monitor is turned off, ending your
current call.
The green LED stops flashing, and the monitor
icon
Using a function key to end all active calls
Press the function key programmed for call clear-
■
down and monitor is turned off for all radios in
your radio group.
The green LED stops flashing, and the monitor
icon
disappears from the display.
disappears from the display.
Operating in conventional mode
appears
77