Tait TM9355 User Manual page 88

Message
Scanning not
on
No channel
captured
Not enough
channels in
group
Cannot delete
channel
Cannot delete
priority chan
Only two
channels in
group
No items
in list
Group full
88 Operating in conventional mode
The following messages may appear when using
nuisance delete to temporarily delete a channel from
a group, when adding or deleting channels from a
group, or changing a group's transmit or priority
channels.
Meaning
You cannot use nuisance delete to temporarily
delete a channel from a group, as there is no
group currently selected.
You cannot use nuisance delete to temporarily
delete a channel from the group, as there is no
channel currently captured (the orange LED is
glowing and not flashing).
You cannot use nuisance delete to temporarily
delete the channel from the group, as the
captured channel is the last remaining group
member.
You cannot use nuisance delete to temporarily
delete the channel from the group. The captured
channel may be the selected channel in a
background scan group.
You cannot use nuisance delete to temporarily
delete the channel from the group, as the
captured channel is a priority channel.
You cannot delete a channel from the group, as
there would be only one group member left.
The action you are attempting is not allowed.
Either:
■
the group does not have a preset transmit
channel or priority channels programmed, or
■
you have added all the channels in the zone
to the current group.
You cannot add any more channels to the group,
as the maximum number of members (50) has
been reached.