Transmitting At Low Power - Tait TM9355 User Manual

Any user interaction (such as pressing PTT) will
cancel a deferred call.
No acknowledgement retries
When you send a call and there is no reply, the call is
resent.
Any user interaction (such as pressing PTT) will
cancel a call that is being resent.

Transmitting at low power

If you are using your radio in conditions where signal
strength is high, you can reduce the drain on your
vehicle battery by transmitting at low power.
When low power transmit is turned on,
the display and calls are made at low power rather
than at the programmed power setting.
Some channels may always transmit at low power.
To turn low power transmit on or off for all channels:
Using the Main Menu
1 Press Menu and select Radio settings >
Functions > Low power tx.
2 Scroll to On (or Off) and press Select. (The current
setting is highlighted.)
Low power tx
Off
On
The message Low power tx activated
(or deactivated) appears on the display.
A deferred calling time limit may have been
configured. Once the time limit has expired the
radio will no longer attempt to retry the call.
Back Select
appears on
Operating in conventional mode 77