Loading New Firmware - Javad HPT435 Series Operator's Manual

2.8. Loading New Firmware

The modem uses ModemVU to load firmware onto the modem. For more information, refer to the
ModemVU Software Manual, available on the JAVAD GNSS website.
1. Download the new firmware package to your computer.
2. Connect your modem and computer, as described in "Connecting HPT435 and Computer"
on page 18.
3. Start ModemVU. Select the HPT435 and than the COM port and click Ok (see
"Configuring HPT435" on page 19).
4. Click the Serial Interface &Tools tab;
5. Click Download Firmware button (Figure 2-9).
www.javad.com
Figure 2-9. Serial Interface & Tools tab
Configuration
Loading New Firmware
Power supply requirements
23