Table of Contents
Advertisement
2.7. Loading New Firmware
The modem uses ModemVU to load firmware onto the modem. For more information, refer to the
ModemVU Software Manual, available on the JAVAD GNSS website.
1. Download the new firmware package to your computer.
2. Connect your modem and computer, as described in "Connecting HPT135 and Computer"
on page 18.
3. Start ModemVU. Select the HPT135 and than the COM port and click Ok (see
"Configuring HPT135" on page 19).
4. Click the Serial Interface &Tools tab;
5. Click Download Firmware button (Figure 2-7).
www.javad.com
Figure 2-7. Serial Interface & Tools tab
Configuration
Loading New Firmware
Power supply requirements
23
Advertisement
Table of Contents
Need help?
Do you have a question about the HPT135 series and is the answer not in the manual?