Console Features - DAVIS Vantage Pro2 Plus User Manual

Console Features

Console Features
Keyboard & Display
The keyboard lets you view current and historical data, set and clear alarms,
change station models, enter calibration numbers, set up and view graphs, select
sensors, and read the forecast. The keyboard consists of 12 command keys
located next to the screen display and four navigation keys located below the
command keys.
A weather variable or console command is printed on each command
key. Just press a key to select the variable or function printed on that
key.
Each command key also has a secondary function which is printed
above the key on the console case. To select the secondary function,
press and release 2ND (on the front of the console, upper right corner)
and then immediately press the key for that function.
After pressing 2ND, the 2ND icon displays above the barometer reading on the
screen for three seconds. All secondary key functions are enabled during this
time. Keys resume normal operation after the icon disappears.
The+ and - navigation keys, along with < and > navigation keys are
used to select command options, adjust values, and to provide
additional functions when used in combination with a command key.
Console Modes
The console operates in five basic modes: Setup, Current Weather, Highs and
Lows, Alarm, and Graph. Each mode lets you access a different set of console
functions or display a different aspect of your weather data.
2
CHILL
WIND
2
ND
+
< >
-