DAVIS Vantage Pro2 Plus User Manual page 35

UV Dose
The UV dose alarm sounds when the accumulated UV dose has exceeded the
dose you set. The UV dose alarm does not arm unless the initial UV dose for the
day has been reset. Once the UV dose alarm value is set, clear the accumulated
UV dose. See "Clearing Weather Variables" on page 28.
Setting Alarms
1. Press ALARM to enter the Alarm Mode to view or set the high alarm
thresholds. The screen displays the current high alarm thresholds. The
ALARM and HIGHS icons also appear.
2. Press the < and > keys to select one of the variables displayed on the screen or
use the console keys to select any weather variable. Also, press HI/LOW to
display the toggle between the high and low alarm threshold settings.
3. Press 2ND then press ALARM to activate the currently selected weather
variable.
4. Press the < and > keys to select digits in the threshold value.
5. Press the + and - keys to change the digit's value up and down.
6. Press DONE to finish changing the alarm setting.
7. Repeat steps 3 through 6 to change additional alarm settings.
8. Press DONE to exit Alarm Mode.
Alarm Mode
31