Screen 3: Retransmit - DAVIS Vantage Pro2 Plus User Manual

If you have a cabled station, or if you have a wireless station and are using the
default transmitter ID setting, press DONE to move to the next screen.
Note: Typically, you can use the default transmitter ID setting of 1 unless you are installing
one of the optional transmitter stations. However, if you are having trouble receiving
your station, there may be another sensor suite with ID 1 operating nearby. Try
changing the ID of both the console and sensor suite to another ID number.
1. Press the < and > keys to select the transmitter ID.
1. When you select a transmitter ID, the ID number is displayed on the screen as
well as the current configuration.
2. Press the + and - keys to toggle console reception of signals from transmitters
using that ID on and off.
3. Press GRAPH to change the type of station assigned to each transmitter. Scroll
through the station types - ISS, TEMP, HUM, TEMP HUM, WIND, RAIN,
LEAF, SOIL, and LEAF/SOIL - until the correct type appears.
4. Press DONE to move to the next screen.
Note: This screen contains functionality for enabling repeaters. If the word "Repeater"
displays in the right corner of the screen and you are not using repeaters as part of
your network, see "Clearing Repeater ID" on page 54. If you are using repeaters as
part of your network see "Wireless Repeater Configuration" (Appendix C) on
page 53 for configuring repeaters on the console.
Screen 3: Retransmit — Wireless Only
If you have a cabled station, press DONE and go to "Screen 4: Time & Date" on
page 14.
The console can retransmit the data it receives from the sensor suite to other
Vantage Pro2 or Vantage Vue consoles using the retransmit feature. By toggling
the feature on, the console becomes another transmitter that requires its own
unique ID to transmit the data received from the sensor suite.
1. Press the + or - keys to turn the retransmit function on and off. The first
available transmitter ID not used by the ISS or any optional sensor is
automatically assigned. Data from the ISS is the only data that can be
retransmitted by the console.
When retransmit has already been enabled, pressing the < and > keys changes
the Transmitter ID used for retransmit.
Screen 2: Transmitter ID configuration

Screen 3: Retransmit

1
2
Setup Mode
13