DAVIS Vantage Pro2 Plus User Manual page 29

Solar Radiation
Press and release 2ND then press SOLAR to display the
current solar radiation reading. Solar radiation is displayed as
Watts per square meter (W/m
Current Evapotranspiration (ET)
Press and release 2ND then press ET to display the current
evapotranspiration reading.
Monthly Evapotranspiration (ET)
Press 2ND then press ET, then repeat the key sequence to display Monthly ET.
Yearly Evapotranspiration (ET)
Press 2ND then press ET, then repeat this key sequence two more times to display
the ET reading since January 1st of the current year.
Note: A solar radiation sensor is required to take readings listed above..
Lamps
Press 2ND then press LAMPS to turn on the backlight for the screen
display. Press 2ND then LAMPS again to turn the backlight off.
Use the backlight when the LCD is not clearly visible. When the
console is battery operated, the backlight remains on as long as keys are pressed
or a ticker tape message is scrolling across the screen. If no keys are pressed, the
backlight automatically turns off about fifteen seconds after it is turned on. If any
key is pressed while it is turned on, it will stay illuminated for 60 seconds from
the last key press. When battery power is low, the backlight does not light.
Note: When the console receives power from the AC adapter, the backlight remains on
until it is toggled off. Leaving the backlight on raises the inside temperature reading
and lowers the inside humidity reading.
N
WIND
NW NE
YEAR GRAPH
TEMP OUT
W E
MPH
TEMP IN
SW SE
S
Last 24 hrs Every1 hr
DAIL Y RAIN
Vertical Scale: X10
ET
Solar Radiation, Current ET, ET Month & ET Year
2
).
pm
HUM OUT
BAR OMETER
F
hPa
HUM IN
F F
HEAT INDEX
RAIN YEAR
in
in
ST ATION NO.1
ET
MO
mm
Selecting Units of Measure
SUN
2
W/m
ET
YEAR
mm
mm
SOLAR
2
ND
2
ND
RAIN
DAY
ET
BAR
LAMPS
2
ND
25