DAVIS Vantage Pro2 Plus User Manual page 45

Screen 2: Reception Diagnostic Screen
The Reception Diagnostic screen displays information pertinent to the console's
wireless reception. To view this screen from the Statistical Diagnostic screen,
press 2ND and then press CHILL. The degree sign displaying in the upper left
corner next to value 1 verifies that the Reception Diagnostic screen is currently
displayed.
The information that is displayed in this screen includes:
1
Last 24 days Every 1
Vertical Scale: 1 0
1. 8-bit timer value of next reception.
2. Radio frequency error of the last packet received successfully. In normal
operation, this value is +1, -1, or 0. This value affects the value of #5 on the
next page.
3. Percentage of good data packets.
4. Signal strength of the last packet received. The values displayed in this field
should generally be between 20 and 60. If a packet is not received
successfully, the signal strength field is dashed out (--).
5. Current frequency correction factor. Shows the Automatic Frequency
Control setting.
6. Frequency index of the next packet to be received.
7. Current number of consecutive bad packets.
8. The number of times that the Phase Lock Loop did not lock.
9. Current streak of consecutive good packets received.
Console Firmware Versions
In some cases, the problem may be that your console firmware doesn't support
what you are trying to do. Use this command to determine the firmware revision
level in your console. You can find more information on Vantage Pro2 console
firmware versions and changes in the Weather Software Support section of our
website. - for information.
Press and hold DONE then press the + key at the same time to display the
console firmware version in the ticker at the bottom of the screen.
2
°
day
Screen 2: Reception Diagnostics Screen
‡
Console Diagnostic Mode
3
am
STATION NO. 5
*
*
‡
4
7
8
*
‡
5
6
9
41