Page 2
If you have a UV sensor, press 2 and UV to toggle be- tween: • UV Index • UV Dose (meds) Outside Forecast Moon Temperature Icon Phase Temp 1-4 (from Soil Moisture Station) Wind Speed Wind Direction Graph Ticker Tape Inside Inside Humidity Temperature...
Page 3
TIME Press 2 & TIME to toggle between: • Current Time & Date • Time of Sunrise & Sunset To set the time and date: 1. Press and hold DONE and then press the down arrow ( − ) to enter the Setup Mode.
Page 4
SOLAR If you have a solar radiation sensor, press 2 display: • Solar Radiation (W/m To continue through the setup mode: & SOLAR to 1. ENTER TIME. To change the time and date. See "TIME." 2. ENTER LATITUDE. Press ( + ) or ( − ) to change the flashing digit. Press ( <...
Page 5
RAIN YR Press RAIN YR to toggle between: • Rain Month (0.00 in, 0.0 mm) • Rain Year (0.00 in, 0.0 mm) • Rain Rate (0.00 in, 0.0 mm) Press 2 & UNITS to change unit of measure. All rain and ET readings will read in the same unit of measure. Changing one from 0.00 inches to 0.0 mm (or vice versa) changes all others.
Page 6
LAMPS Press 2 & LAMPS to toggle between: • Backlight on. • Backlight off. If the console is running on AC power: • The backlight will remain on until you turn it off. If the console is running on battery power, •...
Page 7
The time and date will change as you move between the various highs and lows. (NOTE: Not all highs and lows are available for all weather variables. See Vantage Pro2 Console Manual for details.) To go back or forward in time: Press ( < ) or ( > ). The time and date will change and the corresponding dot on the graph will flash.
Page 8
The time and date will change as you move back and forward in time. (NOTE: Not all highs and lows are avail- able for all weather variables. See Vantage Pro2 Console Manual for de- tails.) To exit the graph screen: Press DONE .
Page 9
If you have a solar radiation sensor, press 2 toggle between: • ET Day (0.00 in, 0.0 mm) • ET Month (0.00 in, 0.0 mm) • ET Year (0.00 in, 0.0 mm) Press 2 & UNITS to change unit of measure. All rain and ET readings will read in the same unit of measure.
Page 10
Press 2 & DEW to display: • Dew Point (°F, °C) Press 2 & UNITS to change unit of measure. All temperature-related readings (inside and outside temperature, wind chill, heat index, and dew point) will read in the same unit of measure. Changing one from °F to °C (or vice versa) changes all others.
Page 11
CHILL Press 2 & CHILL to display: • Wind Chill (°F, °C) Press 2 & UNITS to change unit of measure. All temperature-related readings (inside and outside temperature, wind chill, heat index, and dew point) will read in the same unit of measure. Changing one from °F to °C (or vice versa) changes all others.
Page 12
ALARM To set an alarm: See "SET." (NOTE: Not all alarms are available for all weather variables. See Vantage Pro2 Console Manual for details.) When an alarm is triggered, you will hear an audible alarm: • Until conditions change (i.e., they rise above or fall below the alarm thresholds you have set) or you clear the alarm, if the console is being run on AC power.
3. Press HI/LOW to switch between high and low alarms. (Note: Not all alarms are available for all weather variables. See Vantage Pro2 Console Manual for details.) 4. Press 2 &...
Page 14
SETUP To enter setup mode: Press and hold DONE and then press ( − ). Press DONE to advance or BAR to step back through the setup messages: RECEIVING FROM. Displays available transmitting stations. 2. ON/OFF. To set reception for one of the available transmitting stations. 3.
Page 15
ICONS Forecast Icons. See "FORECAST." Moon Phase. The icons shown below are for the Northern Hemisphere. For the Southern Hemisphere, the orientation is reversed. New Moon First Quarter Full Moon Alarm Bell. Appears when you are setting an alarm. Blinks on and off when an alarm is triggered.
Page 16
INTRO This “Quick Reference Guide” will provide you with abbreviated instructions for all functions of the Vantage Pro2 console. For more de- tailed instructions, see Vantage Pro2 Console Manual. Pages with: CLEAR headings provide general instructions and information about the console.