DAVIS Vantage Pro 2 Quick Start Manual

Connecting a Davis Vantage Pro 2 or Vue to Weather Underground Using a
Complete installation of your weather station.
Davis Support ​
●
Connect the Weatherlink IP device to the ​ V antage Vue​ or ​ V antage Pro 2
console.
Connect the Weatherlink IP to the Internet (plug it in to your router).
Installation ​
●
● Installation ​
Create a free Weatherlink account at ​
Click the ​ A dd Devices​ button
Weatherlink website.
On the device menu, click the ​ I nstall​ button
WeatherlinkIP section.
Enter your ​ S tation Name​ . Select the weather station ​ M odel​ . Identify your
Station Usage​ . Enter your ​ D evice ID​ . Enter your device ​ K ey​ .
​
● B oth the Device ID (DID) and Key are found on the sticker attached to the Weatherlink IP device.
Confirm your station is communication with the Weatherlink website.
● Verify data appears on the website.
Helpful Tip: ​ If no data appears, power cycle the display console after connecting the Weatherlink
●
IP device.
Weatherlink IP Device
i nstallation diagrams and instructions
d iagram​ for Vantage Pro 2.
d iagram​ for Vantage Vue.
w ww.weatherlink.com​
at the top right corner of the
.
in the