Quick Reference Table - Supermicro SuperStorageSystem SSG-5019D8-TR12P User Manual

SuperStorageSystem SSG-5019D8-TR12P User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JI2C1, JI2C2 SMB to PCI-E Slots Enable/Disable
JNS1 Mini-SAS HDD NVMe/SATA Mode Select
JPG1 Onboard VGA Enable
JPL1 LAN1/2/3/4 Enable
JPME2 Manufacturing Mode Select
JPUSB1 USB Wake Up
JWD1 Watch Dog
LED Description
LED1 Power LED
LED2 UID LED
LED3 Overheat/PWR Fail/Fan Fail
LEDM1 BMC Heartbeat
Connector
BT1
COM1
FAN1 - FAN4, FANA, FANB
IPMI_LAN
I-SATA0-3, I-SATA4-7
JD1
JF1
JGP1
JIPMB1
JL1
JLANLED1
JMD1
JMD2
JMD1_SRW1, JMD2_SRW1
JMP1
JMP1_SRW1
JNVI2C1
JPI2C1
JPH1
JPW1
JPV1
Status
Solid Green: Power On
Solid Blue: Unit Identified
Solid Red: Overheat
Blinking Red: PWR Fail or Fan Fail
Blinking Green: BMC Normal
Description
Onboard Battery
COM Header
System/CPU Fan Headers
Dedicated IPMI LAN Port
Eight Intel® PCH SATA 3.0 Ports or Two NVMe U.2 Ports
(See jumper JNS1 setting)
PWR LED/Buzzer Header (Pins 1-4: PWR LED, Pins 5-7: Buzzer)
Front Control Panel Header
General Purpose I/O Header
System Management Bus Header (for IPMI only)
Chassis Intrusion Header
LAN1 - LAN4 Activity LED Header
M.2 PCI-E 3.0 x4/S-SATA5 Connector (M-Key 2280)
M.2 PCI-E 3.0 x2/S-SATA4 Connector (B-Key 3042)
M.2 Holding Screws
Mini PCI-E x1 Connector
Mini PCI-E x1 Connector Holding Screw
NVMe I C Header
2
Power I C System Management Bus (Power SMB) Header
2
4-pin Power Connector for HDD use
24-pin ATX Main Power Connector
12V 8-pin DC Power Connector (Required to provide extra power to CPU, or as
alternative power for special enclosure when the 24 pin ATX power is not in use)
14
Default Setting
Open: Normal, Closed: Clear CMOS
Pins 2-3 (Disabled)
Pins 1-2: SATA (Default), Pins 2-3: NVMe
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)