Installing The System Into A Rack - Supermicro SuperStorageSystem SSG-5019D8-TR12P User Manual

SuperStorageSystem SSG-5019D8-TR12P User's Manual

2-3 Installing the System into a Rack

This section provides information on installing the chassis into a rack unit with the rails
provided. There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that came
with the rack unit you are using.
Note: The default rails (MCP-290-00066-0N; support optional cable arm MCP-290-11808-0N)
only fit the rack at a minimum of 38" depth. The optional rails (MCP-290-11808-0N, length:
33.15", no cable arm support) can fit into a shorter rack.
Inner Rail
1
3
Middle Rail
Figure 2-1. Extending the Rack Rails
20
Outer Rail
Middle Rail
Inner Rail
2
Outer Rail