Table of Contents
Advertisement
Problem
White powder residue
forming within burner
box or on adjacent walls
or furniture.
Heater produces un-
wanted odors.
Heater shuts off in use
(ODS operates).
Gas odor exists even
when control knob is in
OFF position.
Moisture/condensation
noticed on windows.
Purchase these heater accessories from your local dealer. If they can not supply these ac-
cessories, contact ProCom Heating, Inc. at 1-866-573-0674 for information.
EQUIPMENT SHUTOFF VALVE
For all models. Equipment shutoff valve with
1/8" NPT tap.
Existing Gas Line
200346-01A
TROUBLESHOOTING
Possible Cause
1. When heated, the vapors
from furniture polish, wax,
carpet cleaners, etc., turn
into white powder residue.
1. Heater is burning vapors from
paint, hair spray, glues, etc.
See IMPORTANT statement,
page 26.
2. Gas leak. See Warning State-
ment at the top of page 26.
3 Low fuel supply.
1. Not enough fresh air is avail-
able.
2. Low line pressure.
3. O D S / p i l o t i s p a r t i a l l y
clogged.
1. Gas leak. See Warning
Statement at top of page 26.
2. Control valve is defective.
1. Not enough combustion/
ventilation air.
ACCESSORIES
22" Flexible
Brass Shutoff Valve
INSTALLATION KIT
www.usaprocom.com
1/2" Male Flare x 1/2" Male Pipe
Connector
1/2" Male Flare x 3/8" Male Pipe
1/2" Male Flare x 3/8" Female Pipe
Corrective Action
1. Turn heater off when using
furniture polish, wax, carpet
cleaner or similar products.
1. Open a window to ventilate
room. Stop using odor caus-
ing products while heater is
running.
2. Locate and correct all leaks
(see Checking Gas Connec-
tions, page 16).
3. Refill supply tank (Propane/
LP models).
1. Open window and/or door for
ventilation.
2. Contact local gas supplier.
3. Clean ODS/pilot (see Care
and Maintenance, page 24).
1. Locate and correct all leaks
(see Checking Gas Connec-
tions, page 16).
2. Contact customer service.
1. Refer to Air for Combus-
tion and Ventilation require-
ments, page 7.
29
Advertisement
Table of Contents
