Table of Contents
Advertisement
S
S
UPER
ERVER 5018D-LN4T User's Manual
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot.
Press "+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or
"-" on your keyboard to change the value. The default setting is 1.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration
This submenu allows the user the configure settings of Serial Port 1 or Serial Port 2.
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled
and Enabled.
Device Settings
This item displays the status of a serial part specified by the user.
Change Port 1 Settings
This feature specifies the base I/O port address and the Interrupt Request address
of a serial port specified by the user. Select Auto to allow the BIOS to automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port Console Redirection
COM1 Console Redirection
Console Redirection
Select Enabled to enable console redirection support for a serial port specified by
the user. The options are Disabled and Enabled.
7-20
Advertisement
Table of Contents
