Table of Contents
Advertisement
S
S
UPER
ERVER 5018D-LN4T User's Manual
9. After receiving the message that the BIOS update is complete, unplug the AC
power cable from the power supply to clear CMOS, then plug the AC power
cable in the power supply again to power on the system.
10. Press <Del> continuously to enter the BIOS Setup utility.
11. Press <F3> to load the default settings.
12. After loading the default settings, press <F4> to save the settings and exit the
BIOS Setup utility.
C-4
Advertisement
Table of Contents
