Supermicro SuperServer 5018D-LN4T User Manual page 76

S S
UPER ERVER 5018D-LN4T User's Manual
4. Outside of the chassis, put the expansion card and the riser card together by
inserting the expansion card into the riser card.
5. Simultaneously insert the PCI slot bracket of the expansion card into the open
PCI slot and insert the riser card in to the riser card slot on the motherboard.
6. Replace the expansion card clip and screw it onto the chassis to hold the
expansion card in place.
7. Replace the cover onto the chassis, reconnect the power cord and power up
the server.
Note: A single 3.5" HDD configuration allows a low-profile AOC to be installed.
A two 2.5" HDD configuration allows a full-height half-length AOC to be installed.
Figure 6-7. Replacing the Expansion Card Clip
6-8