Installation Procedures; Connecting The Power Cord; Connecting The Keyboard Or Mouse; Switching On The Power - Advantech UTC-320 User Manual

A. COM Port
C. MIC-IN
E. HDMI or VGA (optional)
G. RJ11 (optional)
I. DC-IN

2.2 Installation Procedures

2.2.1 Connecting the power cord

The UTC-320 can be powered by a DC electrical outlet. Be sure to always handle the
power cords by holding the plug ends only. Please follow the Figure 2.3 to connect
the male plug of the power cord to the DC inlet of the UTC-320.

2.2.2 Connecting the keyboard or mouse

Before you start the computer, please connect keyboard port on the I/O section of the
UTC-320.

2.2.3 Switching on the power

When you look at the rear side of the UTC-320, you will see the power switch as
shown in Figure 2.3.
B. Line-out
D. Gigabit LAN x2
F. USB3.0 x4, USB2.0 x2 for Core i
USB2.0 x5, USB3.0 x1 for Celeron
H. Power switch
Figure 2.3 Connect the power cord to the DC inlet
9 UTC-320 User Manual