Averaging Page; Crc Function Polynomial - Texas Instruments ADS7066EVM-PDK User Manual

www.ti.com
3.3.2.3 Averaging Function
Within the averaging function page, as
the drop-down option. The oversampling ratio applies to all analog input channels enabled.
3.3.2.4 Cyclic Redundancy Check (CRC)
The ADS7066 device supports CRC to check the integrity of data transfer. When CRC is enabled, an 8-bit
output is appended to the end of the data transfer. The polynomial is calculated on the CRC-8-ATM as
shown in the page.
SBAU342A – February 2020 – Revised June 2020
Submit Documentation Feedback
Figure 10 shows, the oversampling ratio can be selected through
Figure 10. Averaging Page
Figure 11. CRC Function Polynomial
Copyright © 2020, Texas Instruments Incorporated
ADS7066 EVM Initial Setup
ADS7066EVM-PDK Evaluation Module
11