Error "Comreset Failed" Reported During The Rhel 7.4 Os Installation; Entering The Dracut Cli During The Rhel 7 Os Installation - Inspur OS Installation Manual

10.8.3 Error "COMRESET failed" Reported during the
RHEL 7.4 OS Installation
Symptoms:
During the RHEL 7.4 OS installation, COMRESET failed (errNO=-32) is reported
and the OS cannot be installed.
Figure10-62 COMRESET Failed
Cause analysis:
The ata4 device of the server cannot be activated. The system attempted to
reset it but failed.
The errno=-32 also indicates that a device error exists:
EPIPE
Solutions:
Check the corresponding ata device to confirm whether it is normal or not.
10.8.4 Entering the Dracut CLI during the RHEL 7 OS
Installation
Symptoms:
32 /* Broken pipe */
262