Mounting Outdoor Models With Secureflex Wall Mount - Mobotix M10 Operator's Manual

M10 Camera Manual Part 1

2.5 Mounting Outdoor Models With SecureFlex Wall Mount

The SecureFlex wall mount (item 2)
M10 Outdoor models to a wall or a ceiling. Its innovative and flexible design allows
pointing the camera in virtually any direction. On top, the SecureFlex wall mount
covers RJ45 wall outlets (without the frame) and the concealed cabling improves
the security of the camera.
Wall mount
Bottom cover
The design of the SecureFlex wall mount does not allow for connecting
the external power supply. It is recommended to use either
a Network Power Adapter or a Network Power Rack
to inject the power into the Ethernet or ISDN cabling or to
use an appropriate extension cable.
The SecureFlex wall mount must not be installed upside-down, as
the camera will not be dustproof and resistant against water jets
(IP65) any more! The holes in the bottom cover always have to
point downwards.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 3.5.2006
provides for easy mounting of the MOBOTIX
Turn/tilt unit
Drain holes for exit of condensation
water (never seal off!)
Note
Caution
Standard delivery for
Secure Models
Cover
Camera holder
Network Power Adapter
or Network Power Rack
should be used
23
/64