VTech TL8901 User Manual page 23

Bluetooth
Bluetooth setup
8. The telephone base then displays Connect cell to
base?. Press the YES softkey to connect your cell phone
to the telephone base. For certain cell phones, you may
also need to press a key on your cell phone to confirm
the connection. The telephone base displays Device
connected to the base. The corresponding status icon
( A or B) displays. The corresponding device light on
the telephone base (DEVICE A or DEVICE B) turns on.
• If you already have two devices on the active devices
list, the telephone base screen displays Max. connectable devices is
two and you are prompted to replace an existing device on the active
devices list (page 24).
If you have trouble pairing your cell phone, it may not be compatible
with your TL86109. Check the Bluetooth compatibility list at
www.telephones.att.com
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• If your Bluetooth device fails to connect with the telephone base, the telephone base
displays Connection failed and then Auto-connect function enabled. Press the
SELECT softkey and the telephone base will then periodically attempt to connect with
your Bluetooth device.
• The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your TL86109 to complete the pairing
process.
• Refer to the user's manual of your cell phone on how to search for or add a new
Bluetooth device.
.
1
Connect cel l
to base?
YES NO
Device
connected
to the base