Bluetooth Setup; Pair A Cell Phone - VTech TL8901 User Manual

At&t dect 6.0 2-line corded/cordless telephone/ answering system
Table of Contents

Advertisement

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must first
pair and connect your Bluetooth cellular phone with the telephone base. The
TL86109 can then be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 15 feet of the telephone base for optimal
performance.

Pair a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
Press the MENU softkey on the telephone base in idle
1.
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
2.
Bluetooth, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to highlight Add
3.
cellular, then press the SELECT softkey. The screen
displays Please set your cell to search for devices
then press
If there are already four devices on the paired
devices list, the screen displays Device list is full.
Replace paired device?
confirm and you are prompted to replace an existing
paired device (page 24).
If a device is already connected to the telephone
base, the screen displays Connected devices will
be temporarily disconnected. Press the OK softkey
to temporarily disconnect all the connected devices
and continue the pairing process.
4.
Turn on the Bluetooth feature of your cell phone and
search for or add new devices.
Once your cell phone finds AT&T DECT 6.0, press the
5.
appropriate key on your cell phone to continue the pairing process.
6.
Enter the PIN of the telephone base (the default PIN is 0000) into your cell
phone.
7.
When a device is successfully paired, the telephone base displays
Pairing complete.
. Press the NEXT softkey.
−¬ v
Press the YES softkey to
.
16
Answering sys
Directory
Cal l log
Bluetooth
SELECT
BLUETOOTH
Download dir
Add cel lular
Add headset
SELECT
Please set your
cel l to search
for devices
then press -
-
NEXT
AT&T DECT 6.0
discoverable
PIN:0000
Pairing
complete

Advertisement

Table of Contents
loading

Table of Contents