VTech TL8901 User Manual page 137

Appendix
Screen messages
Intercom
Intercom ended
INTERCOM TO:
Line 1 Incoming call
Line 2 Incoming call
Low battery
Memory full
Microphone off
Microphone ON
No AC power.
System can only
access Line 1
No battery
No entries found.
Try downloading
from SIM memory
only?
No entries found.
Try downloading
from phone memory
only?
No connected cellular
phones
NO LINE
No message
No signal.
Call ended.
Not available
at this time
ON HOLD
The cordless handset or telephone base is on an
intercom call.
The intercom call has just ended.
You have started the intercom process, and need to
choose a cordless handset or the telephone base you
wish to call.
There is an incoming call on line 1.
There is an incoming call on line 2.
The battery needs to be charged.
The answering system has no recording time left.
The cordless handset or telephone base microphone is
off. The other party cannot hear you but you can hear the
other party.
The cordless handset or telephone base microphone
is on.
There is no AC power. You can only use the corded
handset and dialing keys to make and answer calls. Only
line 1 is available in the event of a power failure.
The battery is not properly installed and the handset is in
the charger.
There are no entries found when you download a cell
phone directory from the cell memory.
There are no entries found when you download a cell
phone directory from your SIM card.
There are no entries found in either the cell or SIM card
when you download a cell phone directory from both
memories.
There is no cellular phone connected to the base.
There is no telephone line connected.
There is no message recorded on the answering system.
The phone lost the connection with the telephone base
or did not have a strong enough signal and the phone call
ended.
Someone else is already using the directory or caller ID
history.
A call has been put on hold.
11