VTech TL8901 User Manual page 60

Telephone settings
Answering system settings
Using the telephone base:
Press the MENU softkey on the telephone base in idle
1.
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
2.
Answering sys, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to choose
3.
Mailbox 1 or Mailbox 2, then press the SELECT softkey.
4. Press the SELECT softkey again to choose
Announcement.
5. Press DIR, CID, /DELETE or /REC to highlight
Annc mode and then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to highlight to A
6.
& B schedule, then press the TIMES softkey.
The telephone base displays ANNC A BEGINS. Press
7.
DIR, CID, /DELETE or /REC, or use the dialing keys
to set the answering system time for Annc A.
Press the SET softkey to confirm.
8. The telephone base displays ANNC B BEGINS. Press
DIR, CID, /DELETE or /REC, or use the dialing keys
to set the answering system time for Annc B. Press the
SET softkey to confirm.
9. The telephone base displays the time schedules set in the telephone
system. Press the OK softkey to confirm.
NOTES:
• If the clock is not set, the telephone base displays To use A & B schedule, system clock
must be set. Set the date and time (page 47) before you set the
announcement mode.
• If the answering system is off when you attempt to record an outgoing announcement,
the answering system automatically turns on. If the memory is full, the answering
system displays Calls will not be answered. Mailbox X full.

ANNOUNCEMENT
Annc audio
Annc mode
SELECT
ANNC MODE
Annc A only
Annc B only
A & B schedule
TIMES SET
ANNC A BEGINS
09:00 AM
SET
ANNC B BEGINS
06:00 PM
SET
- ANNC A -
09:00AM - 05:59PM
- ANNC B -
06:00PM - 08:59AM
OK