Table of Contents
Advertisement
Available languages
Available languages
V1.0
7.
Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
8.
Avoid unintentional starts. Make sure the power switch is set to OFF
before connecting the drill press to a power supply.
9.
Make sure any adjustment mechanisms are secure before using the tool
KICKBACK PRECAUTIONS
Kickback can be avoided by taking proper precautions:
1.
Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the drill bit.
2.
Only use the drill bit designed for the tool.
3.
Always make sure the work surface is free from nails and other foreign
objects. Cutting into a nail can cause the drill bit and tool to jump and
damage the drill bit.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the drill press to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4.
Do not disconnect the power cord in place of using the power switch. This
will prevent an accidental start-up when the power cord is plugged into
the power supply.
5.
In the event of a power failure, turn off or unplug the machine as soon as
the power is interrupted. The possibility of accidental injury could occur if
the power returns and the unit is not switched off.
Page 7
MINI BENCH-TOP DRILL PRESS
www.princessauto.com / 1-800-665-8685
9027814
Advertisement
Table of Contents
