Electrical Safety - Power Fist 8571481 User Manual

8571481 14 Gauge Barrel Grip Electric Metal Shear V4.0
4. Always use blades that are correctly sized and shaped for the tool.
Blades that do not match the tool's mounting hardware will run
erratically, causing loss of control.
5. Do not use dull, dirty or damaged blades. To clean blades, remove
the blade from the tool, clean it with gum and pitch remover, hot
water or kerosene.
a. Do not use gasoline to clean the blades.
6. Ensure that all blade adjustment levers are tight and secure before
making any cuts.
7. ALWAYS hold the tool firmly with both hands, unless it is designed for
single hand use. NEVER place your hand or fingers in line with
the blade.
8. Do not force the tool. This can cause uneven cutting, loss of accuracy
and loss of control.
ELECTRICAL SAFETY
WARNING! To reduce risk of electric shock, be certain that it is
connected to a properly grounded receptacle.
1. Disconnect tool from power source before cleaning, servicing,
changing parts/ accessories or when not in use.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces such as
pipes, radiators, cooking stoves and refrigerators. There is an
increased chance of electrical shock if your body is grounded.
3. Do not disconnect the power cord in place of using the ON/OFF
switch on the tool. This will prevent an accidental startup when the
power cord is plugged into the power supply.
4. Do not alter any parts of the tool or accessories. All parts and
accessories are designed with built-in safety features that may be
compromised if altered.
5. Make certain that power source conforms to requirements of
your equipment.
6
For technical questions call1-800-665-8685