Eiki EK-355U Owner's Manual page 33

Input select
Direct operation
Press HDMI 1, HDMI 2, VGA 1, VGA 2, VIDEO,
HDBase T, COMPONENT or USB-A on the
remote control as input source.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press  button to select VGA 1, VGA
2, HDMI 1, HDMI 2(MHL), HDBaseT,
Component, Video, S-video, Memory Viewer,
Network or USB Display, then press the OK
button.
When input source is from computer
VGA 1
connected to VGA IN 1 terminal with
VGA cable, please select "VGA 1".
When input source is from comput-
VGA 2
er connected to VGA IN 2(YPbPr/
S-VIDEO) terminal with VGA cable,
please select VGA 2.
When input source is from equip-
HDMI 1
ment connected to HDMI 1 terminal
with HDMI cable, please select
"HDMI 1".
When input source is from equip-
HDMI 2(MHL)
ment connected to HDMI 2(MHL)
terminal with HDMI cable, please
select "HDMI 2".
When input source is from equip-
HDBase T
ment connected to HDBaseT termi-
nal with RJ45 cable, please select
"HDBaseT".
Select it when the input source is
Component
from the video equipment connected
to VGA IN 2(YPbPr/S-VIDEO)
terminal via Component to VGA
cable.
Select it when the video input signal
Video
is connected to VIDEO IN terminal.
Note:

- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.
Input selection
Remote control
COMPONENT
Control Panel
Input select menu
HDMI 2
VGA 2
HDMI 1
VGA 1
VGA 1
VGA 2
HDMI 1
HDMI 2(MHL)
HDBase T
Component
Video
S-video
Memory Viewer
Network
USB Display
HDBaseT
VIDEO
USB-A
INPUT
INPUT
33