Keystone - Eiki EK-355U Owner's Manual

Keystone

This function is used to store or reset the
keystone correction when the AC power cord is
unplugged.
1 Press MENU button on the remote control to
display screen menu. Press  button to select
"Expand", then press the OK button.
2 Press button to select "Keystone", press the
OK button.
3 Press button to select the item you want to
set, press the OK button.
Keystone
Sets whether or not to keep the keystone correction after turn off the projector or plug out the
power cord.
Store .... The keystone correction will be kept when plug out the power cord or turn off the projector.
Reset ... When "Standby mode" is set to "Eco", plug out the power cord or turn off the projector, the
keystone correction will be canceled. When "Standby mode" is set to "Normal", plug out the
power cord, the keystone correction will be canceled; turn off the projector, the keystone
correction will be kept.
H/V Keystone
Adjust when the horizontal or vertical trapezoid of the projected image is distorted.
Reduce the upper
width with  button.
OSD setting-Expand
Reduce the lower
width with  button.
Keystone menu
Expend
Keystone
Keystone
H/V Keystone
Corner correction
Reset value
Reduce the left
width with  button.
Store
Reduce the right
width with  button.
47