Advertisement
Quick Links
Tabletop TV Stand
Instruction Manual
SKU: STAND-TV01T
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv01t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo STAND-TV01T
Summary of Contents for Vivo STAND-TV01T
- Page 1 Tabletop TV Stand Instruction Manual SKU: STAND-TV01T Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv01t GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 110lbs Failure to do so may result in serious injury. (49.9kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 Connect base plates (A1, B1) to junction plates (A2, B2) using M6x10 bolts (C) as shown in the diagram. - Page 4 STEP 2 Connect the lower TV brackets (A4, B4) to the middle and upper TV brackets (A5, A6, B5, B6) using M6 nuts (D2). Use the crescent wrench (F) to tighten. NOTE: The middle and/or upper TV brackets may be left unused for smaller TVs that do not require the additional height.
- Page 5 STEP 3 Attach TV brackets to junction plates using M6x10 bolts (C) and M6 cap nuts (D1). Secure using the Allen wrench and crescent wrench (E, F). Attach plastic covers (A3, B3) to junction plates by pressing tabs into holes. STEP 4 Attach assembled brackets to back of TV using bolts (M-S) and washers (J-L) according to mounting holes in TV.
- Page 6 STEP 5 OPTION A: Wood Stud Wall Drill a 1.75” (45mm) deep hole using a 5/32” (3.8mm) drill bit. Attach security wire (X) to hole using the M6x45 bolt (U) with washer (V) and tighten with a Phillips screwdriver. 45mm 3.8mm OPTION B: Concrete/Brick Wall Drill a 2”...
- Page 7 STEP 5 (Continued) Ensure that security wire (X) has little or no slack between the wall and TV. This will greatly reduce the risk of tipping.
- Page 8 - 92% within < 3hr : < 15 M www.vivo-us.com AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TV01T and is the answer not in the manual?
Questions and answers