Table of Contents
Advertisement
Quick Links
Tabletop TV Stand
Instruction Manual
SKU: STAND-TV00H
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv00h
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-TV00H
Summary of Contents for Vivo STAND-TV00H
- Page 1 Tabletop TV Stand Instruction Manual SKU: STAND-TV00H Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv00h GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 110lbs Failure to do so may result in serious injury. (49.90kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 Attach TV plate (A) to support poles (D) using M6x10 bolts (H) and M6 washers (I). *TV plate (A) can be installed on wall optionally, wall mounting hardware is not included.
- Page 4 STEP 3 First, make sure you have the correct diameter bolt (L to Q) your TV requires. Once you have the correct size, please see the diagram below. You will then thread the bolt through the bracket (B) into the TV using the correct washers (R,S,T), and using the spacer (U,V) if necessary. Please make sure the TV brackets are vertically centered and level with each other.
- Page 5 STEP 4 Attach Monitor Brackets (B) to TV Plate (A) as shown in diagram.
- Page 6 STEP 5a If your TV is located near a wall as shown in diagram 5a, then the security wire can be attached for added safety. This is done by attaching the two ends of the security wire to the top two holes on the back of the TV, shown in diagram 5b.
- Page 7 STEP 5 (continued) Option B: Concrete/Brick Wall DIAGRAM D...
- Page 8 - 92% within < 3hr : < 15 M www.vivo-us.com AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TV00H and is the answer not in the manual?
Questions and answers