Introduction - Tektronix SPG70UP Instructions Manual

Introduction

Document organization
Firmware upgrade
SPG70UP Field Upgrade Instructions
This document provides instructions for installing the following field upgrades for
the SPG700 Multiformat Reference Sync Generator:
Option DPW – adds a second, hot-swappable redundant (backup) Power
Supply module
These instructions are composed of the following sections:
How to install and configure Option DPW describes how to install the backup
Power Supply module into the SPG700 generator. This section also describes
how to configure one of the Power Supply module as the preferred (active)
supply. (See page 8.)
How to upgrade the instrument firmware describes how to install the latest
version of firmware. (See page 13.)
Tektronix releases software and firmware updates for products to add new features
and to fix product problems. You can find the latest firmware for your product at
the Tektronix Web site (www.tek.com/downloads).
We recommended that you verify your instrument has the latest firmware installed
when performing upgrades.
Introduction
5