Sony SRG-X400 Operating Instructions Manual page 72

Exposure compensation (EXPOSURE - EX-COMP,
LEVEL)
Select the exposure correction value from the drop-
down list to adjust the target brightness for the
automatic exposure setting. Selecting higher value
brightens the image and lower value darkens the
image. This function can be selected only when
[Mode] is set to [Full auto], [Shutter priority], or [Iris
priority].
Backlight compensation (EXPOSURE -
BACKLIGHT)
Select the checkbox to enable the backlight
compensation function. This function can be
selected only when [Mode] is set to [Full auto],
[Shutter priority], or [Iris priority].
Spotlight compensation (EXPOSURE - SPOTLIGHT)
It darkens the exposure when a part of the object is
bright, such as a spotlighted face. Spotlight
compensation function is disabled when the
checkbox of [Backlight compensation] is selected.
This setting is available when [Mode] is set to [Full
auto], [Shutter priority], or [Iris priority].
AE speed (EXPOSURE - AE SPEED)
Select the adjustment speed for exposure
adjustment.
You can select the speed at which the camera
reaches the optimum exposure setting from 1
(standard) to 48 (slow). Select when the brightness
of the object changes instantaneously.
This setting is available when [Mode] is set to [Full
auto], [Shutter priority], or [Iris priority].
White balance
Mode (COLOR - WHITE BALANCE MODE)
Select a white balance mode.
[Auto1]: Automatically adjusts the color
reproduction closer to the image you are
viewing (approximately 2500 K to 7500 K).
[Auto2]: Eliminating the influences caused by
environmental illumination or lights,
automatically adjusts the color reproduction
closer to the original color of the object
(approximately 2000 K to 10000 K).
[Indoor]: Set a white balance suitable for indoor
photography.
[Outdoor]: Set a white balance suitable for outdoor
photography.
[One push WB]: Select to enable [Offset] and [One
push trigger].
[Manual]: Set [R gain] and [B gain]. Select gain
values from 0 to 255.
Speed (COLOR - SPEED)
When [Mode] is set to [Auto1] or [Auto2], you can
adjust the speed at which the camera reaches the
white convergence point. Select a value from [1], [2],
[3], [4], or [5]. [5] is the fastest and [1] is the slowest.
Offset (COLOR - OFFSET)
When [Mode] is set to [Auto1], [Auto2], or [One push
WB], you can adjust the shift amount of the white
convergence point in a range from 0 to 14. White
balance is shifted toward blue when a lower value is
selected, and it is shifted toward red when a higher
value is selected.
One push trigger (COLOR - ONE PUSH TRIGGER)
Click [On] to adjust the white balance. Shoot and
zoom a large white object in the center of the screen
before adjustment.
R gain (COLOR - R.GAIN)
White balance can be manually adjusted in a range
from 0 to 255.
This setting is enabled only when [Mode] is set to
[Manual].
B gain (COLOR - B.GAIN)
White balance can be manually adjusted in a range
from 0 to 255.
This setting is enabled only when [Mode] is set to
[Manual].
Color matrix (BRC-X400/X401)
Enable (COLOR - MATRIX)
Enables the color matrix setting.
Matrix (COLOR - SELECT)
Select an internal preset matrix for matrix
calculation. You can select from [STD], [HIGH SAT],
[FL LIGHT], [MOVIE], [STILL], [CINEMA], [PRO],
[ITU709], or [B&W]. This setting is available when the
checkbox of [Enable] is selected.
Saturation (COLOR - LEVEL)
Adjust the color density of the image. Select a value
from [0] to [14]. The higher the value, the darker the
color and the smaller the value, the lighter the color.
This setting is available when the checkbox of
[Enable] is selected.
Hue (COLOR - PHASE)
Adjust the color tone of the entire video. Select a
value from [–7] to [0] to [+7]. This setting is available
when the checkbox of [Enable] is selected.
R-G, R-B, G-R, G-B, B-R, B-G (COLOR - R-G, R-B,
G-R, G-B, B-R, B-G)
Adjusts the hue in the range of [–99] to [99]. This
setting is available when the checkbox of [Enable] is
selected.
72