Sony SRG-X400 Operating Instructions Manual page 36

SPEED (White balance - Speed)
Adjust the speed at which the camera reaches
the white convergence point when [AUTO1] or
[AUTO2] is chosen. Choose a value from [1], [2],
[3], [4], and [5]. [5] is the fastest and [1] is the
slowest.
OFFSET (White balance - Offset)
The shift amount of the white convergence point
can be adjusted when [WHITE BALANCE MODE] is
[AUTO1], [AUTO2], or [ONE PUSH]. The range is
from [–7] to [0] to [+7]. White balance is shifted
toward blue when a negative value is chosen,
and it is shifted toward red when a positive value
is chosen.
R.GAIN (White balance - R gain)
B.GAIN (White balance - B gain)
Displayed when [MANUAL] is chosen. White
balance can be manually adjusted within the
range from [–128] to [+127].
MATRIX (Color matrix - Enable) (BRC-
X400/X401)
You can emphasize or weaken a specific color
region while keeping the white convergence
point unchanged. When you turn this [ON], the
following items are displayed for adjustment.
SELECT (Color matrix - Matrix) (BRC-
X400/X401)
You can choose an internal preset matrix for
matrix calculation. You can choose from [STD],
[HIGH SAT], [FL LIGHT], [MOVIE], [STILL],
[CINEMA], [PRO], [ITU709], and [B&W]. This
becomes disabled when [MATRIX] is turned
[OFF].
LEVEL (Color matrix - Saturation) (BRC-
X400/X401)
You can adjust the color density of the picture.
Choose a value in the range from [0] to [14]. The
greater the number, the denser the colors, and
vice versa. This becomes disabled when
[MATRIX] is turned [OFF].
PHASE (Color matrix - Hue) (BRC-X400/
X401)
You can adjust the color tone of the entire
picture. Choose a value from [–7] to [0] to [+7].
This becomes disabled when [MATRIX] is turned
[OFF].
R-G, R-B, G-R, G-B, B-R, B-G (Color
matrix - R-G, R-B, G-R, G-B, B-R, B-G)
(BRC-X400/X401)
You can set a coefficient for each combination of
RGB individually, to adjust the hue of the entire
picture.
Choose a value from [–99] to [0] to [+99]. This
becomes disabled when [MATRIX] is turned
[OFF].
36