Fujitsu FI-4530C Operator's Manual page 93

Symptom6
Is the glass clean?
Is the ADF cover pressed down
or heavy object placed on the ADF
during scanning?
Is something causing the scanner
to vibrate during scanning?
Is the scanner not installed on a
flat, level surface or is a scanner's
rubber foot missing?
Contact the manufacturer's
authorized service center.
*) For details on how to clean dirty locations, refer to "3 DAILY CARE" on page 51.
88
Images are distorted or blurred.
NO
YES
YES
NO
YES
NO
NO
YES
Clean dirty locations.(*)
Do not press down the ADF
or place heavy objects on the
ADF during scanning.
Do not allow anything to
cause the scanner to
vibrate while scanning.
Install the scanner on a flat,
level surface or attach rubber
the foot.