Fujitsu FI-4530C Operator's Manual page 25

Brightness
Sets the brightness of the entire image. Specify the brightness as a number within the
range of 1 (dark) to 255 (bright). To brighten the entire image, decrease the value of the
setting. To darken the entire image, increase the value.
Contrast
Sets the contrast between light and shadow of the scanned image. Specify the contrast
as a number within the range of 1 (low [soft]) to 255 (high [sharp]). Increasing this
value makes the contrast sharper.
Scan Type
Selects the scanning method.
ADF (Front Side)
ADF (Back Side)
ADF (Duplex)
Paper Size
Selects a paper size according to the size of the document to be scanned. Select a stan-
dard paper size from the list.
Paper Layout
Specifies orientation of the documents as portrait or landscape.
Automatic Size and Skew Detection
Automatically detects the document's page size, and the output will be adjusted to the
detected page size. Document skewing is automatically detected and corrected for the
output image.
[More...] button
Opens [More Settings] window. Used for setting advanced features.
20
Scans only the front sides of documents.
Scans only back sides of documents.
Scans both the front and the back sides of documents.
When this option is selected, the each page of docu-
ments is scanned in "front to back" order. This option
can be used only for the models that support duplex
scanning.