Fujitsu FI-4530C Operator's Manual page 109

■ Precautions
The following documents may not be scanned successfully.
•
Documents of non-uniform thickness (e.g. envelopes)
•
Wrinkled or curled documents (Refer to HINT on page 105.)
•
Folded or torn documents
•
Tracing paper
•
Coated paper
•
Carbon paper
•
Carbonless paper
•
Photosensitive paper
•
Perforated or punched documents
•
Documents that are not square or rectangular
•
Very thin documents
Do not use the following documents:
•
Paper-clipped or stapled documents
•
Documents on which the ink is still wet
•
Documents smaller than A8 (Portrait) in size
•
Documents wider than A3 or 11 in. x 17 in. size
•
Documents other than paper such as fabric, metal foil, or transparencies
HINT
ATTENTION
104
•
When scanning semi-transparent documents, set the density to light to
avoid a bleed through.
•
To prevent the rollers from becoming dirty, avoid scanning documents
containing large areas written or filled in pencil. If scanning of such docu-
ments is inevitable, clean the rollers more frequently.
Carbonless paper contains chemical substances that may harm the Pad
ASSY or rollers (e.g. Pick roller) when documents are fed. Pay attention to
the following:
Cleaning:
Replacing parts: The service life of the Pad ASSY and the Pick roller
•
When scanning wood containing paper, the life of the Pad ASSY and the
Pick roller may be shortened compared to the case of scanning woodfree
paper.
If pick errors occur frequently, clean the Pad ASSY
and the Pick roller. For details on cleaning the Pad
ASSY and the Pick roller, refer to "3.2 Cleaning the
ADF" on page 54.
may be shortened compared to the case of scanning
wood containing paper documents.