Fujitsu FI-4530C Operator's Manual page 98

Symptom10
Do pickup errors occur frequently?
Do the documents satisfy the
conditions described under the
"Precautions" in "6.2 Document
Paper Quality"?
YES
Were the documents fanned
before loading into the ADF paper
chute?
YES
Is the Pad ASSY attached
correctly?
YES
Is the pick roller dirty?
NO
Is the pick roller worn out?
NO
Contact the manufacturer's
authorized service center.
*1) For details on requirements, refer to "6.2 Document Quality" on page 103.
*2) For details on how to attach the Pad ASSY, refer to "4.2 Replacing the Pad ASSY" on
page 66.
*3) For details on how to clean the Pick roller, refer to "3.2 Cleaning the ADF" on page 54.
*4) For details on how to replace the Pick roller, refer to "4.3 Replacing the Pick Roller" on
page 70.
5.2 Remedying Common Troubles
NO
Use documents that satisfy
the requirements. (*1)
Fan the documents before
NO
loading, or reduce the
number of sheets of the
documents.
NO
Attach the Pad ASSY
correctly.(*2)
YES
Clean the pick roller.(*3)
YES
Replace the pick roller.(*4)
fi-4530CImage Scanner Operator's Guide
5
93